• Ready to use.
• It is easy and fast to apply and saves labor.
• Has high adhesion.
• Has long working time.
• Does not slip.

a) Surface Preparation:
The application surface should be hardened. The application surface should be free of adhesion preventive materials such as dust, oil, tar, pitch, paint, silicone, curing agent, detergent and molding oil. Defects on the application surface should be corrected with appropriate Termatect Repair Mortar 24 hours before, depending on the depth and structure of the surface.

b) Product Preparation:
The product should be mixed before application. In order to obtain a better bonding surface, the product must be applied on the surface with the flat side of the trowel and then combed with the toothed side of the trowel selected according to the tile size.

c) Application Method:
The tiles should be adhered by force on the combed mortar within 20 minutes. This period may be shortened in applications made in unsuitable ambient conditions such as high temperature, low humidity and wind. Bonding process should not be performed on the product whose term has expired, the product should be scraped off the surface. For bonding of insulation panels, point or linear application should be made. Package must be closed tightly outside of use. The expired or caked product in the container should be discarded. After application, hands and application tools should be washed with plenty of water. Surfaces should be cleaned with a damp cloth. Tiles adhered with 1019 Pastafix should not be exposed to water for at least 10 days. In ceramic applications on old ceramics, the drying time of the product may increase to 1-2 weeks depending on the ambient conditions and ceramic size. It is recommended to use cement-based products for bonding low-absorbent and large-size coating materials.