6001 Primer BrütExposed Concrete Primer

6001

It is acrylic polymer based, one component, quartz granular economic plaster primer that increase the adherence and working time of the surface before the application of cement or gypsum based plasters for exposed concrete surfaces.

► Polymer Dispersion Based
► Indoors and Outdoors
► Easy to Apply
► Does Not Harm Human and Environmental Health
► Ready to Use
► Low Consumption

• Indoor and outdoor,
• On horizontal and vertical surfaces,
• On roofs
• As a primer to increase adhesion strength in the application of plaster, lime and cement based plasters on the exposed concrete surface.

• Easy to apply.
• Increases adherence of cement and especially gypsum based plasters to exposed concrete.
• Prevents rapid water loss of cement and especially gypsum based plasters.
• Increases working time and workability of cement and especially gypsum based plasters.
• Solvent free.

a) Surface Preparation:
The surface should be cured and intact. The surface should be free of residues (oil, dirt, detergent, soap, etc.) that will prevent adhesion. If necessary, the surface should be smoothed with Termatect Repair Mortars and cracks should be repaired.

b) Application Method:
6001 Primer Brüt is applied by brush or roller after adding 25% water into the plastic bucket and mixing well. It is recommended to make the mixture with low speed mixer less than 500 rpm. Drying time is 45-60 minutes. Do not apply on it before it dries. The temperature of the application surface should be minimum 5°C-30°C and the surface should not receive rain. After the applied 6001 Primer Brüt has dried, the application of plaster should be started at least 24 hours later. After application, hands and application tools should be washed with plenty of water.

Contact...

You can contact us to get more detailed information about our products.

“ We will continue to seek superior quality and superior service with the power we receive from you. ”

Terma Construction Chemicals
San. Tic. Ltd. Şti.