0203 Terma Color SSatin Plaster Primer

0203

It is an acrylic emulsion based, ready-to-use transparent primer that prepares plaster surfaces for painting. It is used as emulsion based paint primer on porous, with high suction and/or weak mineral surfaces such as satin plaster, gypsum board, putty.

► Copolymer Emulsion Based
► Ready to Use
► For Silicone Paints
► Reduces Paint Consumption
► Easy To Apply
► Economic

> Opaque
> Public Works Pos No: 

• It is applied on very absorbent surfaces and/or surfaces with dusting behaviour such as plaster, limewash, low quality absorbent plastic painted surfaces that have lost their properties, aerated concrete etc.

• Thanks to its high penetration and strong binding properties, it prevents the absorbency of the plaster surface and allows the paint to integrate with the surface. It prevents early drying and provides economy by reducing paint consumption. 0203 Termatect Color S, which greatly improves the performance of the paint, makes plaster surfaces which are problematic surfaces in the paint ideally ready for painting.
• 0203 Termatect Color S is safely used for priming process before painting on all absorbant surfaces with high dusting behaviour.

a) Surface Preparation:
Surfaces that 0203 Termatect Color S will be applied must be dry, clean and self-supporting. After sandpapering on plaster and similar surfaces, after removing dust of the surface with a wet cloth/wet car wash brush, twig broom, transparent plaster application should be started.

b) Application Method:
Surfaces that 0203 Termatect Color S will be applied must be dry, clean and self-supporting. After sandpapering on plaster and similar surfaces, after removing dust of the surface with a wet cloth/wet car wash brush, twig broom, plaster application should be started. 0203 Termatect Color S can be applied by brush or roller without dilution. The surface temperature during application should be between +5°C and +30°C. The surface must be protected from frost during plaster application and drying. Paint should be applied at least 6 hours after 0203 Termatect Color S application. It should be applied without combing/polishing with brush or roller (By touring one tour with roller around surface in one direction). It is not recommended to use the plaster by combing especially for insulation purposes, and to use it on glitoline paste or solvent based plaster and paint.

Contact...

You can contact us to get more detailed information about our products.

“ We will continue to seek superior quality and superior service with the power we receive from you. ”

Terma Construction Chemicals
San. Tic. Ltd. Şti.